MEPCO Load Shedding Schedule Check Timings & Peak Hours 2026

MEPCO load shedding schedule is the daily timetable that decides when Multan Electric Power Company switches off supply to a specific feeder, whether for a few hours or most of the day, to balance electricity demand against available supply. It’s for any consumer in Multan, Bahawalpur, Sahiwal, Rahim Yar Khan, Khanewal, or other MEPCO areas who wants to know exactly when their power goes out and why some streets get less load shedding than others.

How Do You Check the MEPCO Load Shedding Schedule for Your Area?

Since timings are feeder-specific, the schedule you need depends on knowing which feeder actually serves your property.

Method 1: Check via MEPCO’s Official Website

  • Go to the official MEPCO website, mepco.com.pk.
  • Look under “Consumer Services” or the “Load Shedding” section on the homepage.
  • Find the load shedding table, usually broken down by feeder name or sub-division.
  • Match your feeder name to the listed hours (if you don’t know your feeder name, check your bill or ask your local office).

Tip: Feeder names on the schedule table often correspond to a specific grid station or locality, so cross-check the feeder name printed on a recent bill if you’re unsure.

Method 2: Check via the CCMS Portal Using Your Reference Number

  • Visit the Customer Complaint Management System at ccms.pitc.com.pk.
  • Look for the load shedding or outage-check option.
  • Enter your 14-digit reference number, printed at the top of your MEPCO bill Online.
  • Submit to see outage information tied specifically to your connection.

Note: This method pulls data specific to your exact connection, which is more reliable than a general area-wide table if your feeder isn’t clearly listed elsewhere.

Method 3: Ask Your Local SDO Office or Call the Helpline

If neither online option gives you a clear answer, call your local Sub-Divisional Officer (SDO) office directly, since they know exactly which feeder and grid station covers your property. You can also dial 118, the shared WAPDA helpline, and ask for your feeder’s current load shedding hours, or send an SMS to 8118 to report an unscheduled outage.

Tip: Save your feeder name once you find it out, since you won’t need to repeat this lookup every time, just recheck the same feeder’s hours on the schedule table whenever timings change seasonally.

Who Is Affected by the MEPCO Load Shedding Schedule, and Why It Varies

Load shedding in MEPCO’s network is applied feeder by feeder, not city by city, so two households on the same street can face very different outage hours if they’re connected to different grid stations.

What decides your schedule:

  • Your feeder’s loss category (how much revenue that feeder recovers versus how much electricity is stolen or unpaid on it)
  • Seasonal demand, since summer months see far more load shedding than winter
  • Grid station capacity in your area and whether it’s under maintenance

Low-loss, high-recovery feeders often see little to no scheduled load shedding, while high-loss rural or peri-urban feeders can face 8 to 12 hours a day in peak summer. There’s no fee involved in checking your schedule, and MEPCO is required to publish it for public reference.

MEPCO Peak Hours Timing You Should Know

Peak hours are the window when electricity demand across MEPCO’s grid stations is at its highest, and this affects both load shedding risk and your bill.

  • Summer peak hours (April to October): roughly 6 PM to 10 PM, sometimes extending to 7 PM to 11 PM depending on the day’s demand
  • Winter peak hours: generally shorter and less intense, since heating and cooling loads drop

During these hours, the grid is under the most strain, so unscheduled load shedding is more likely even on feeders with a light scheduled outage. Running heavy appliances like air conditioners, water heaters, and irons outside this window, if you’re on a time-of-use tariff, can also cut your bill noticeably, some MEPCO users report a 30% to 40% reduction just from shifting heavy loads off peak hours.

Why this matters: even if your feeder isn’t due for scheduled load shedding, avoiding peak-hour overloading of your own connection reduces your chances of tripping a breaker or facing a voltage drop during the grid’s busiest hours.

MEPCO Shutdown Schedule for Maintenance

Separate from routine load shedding, MEPCO also announces planned shutdowns for maintenance work on transformers, grid stations, or transmission lines.

  • These are usually announced a day or two in advance through MEPCO’s official website, local press, or the DISCO’s Facebook page.
  • Maintenance shutdowns often list an exact date, start time, and expected restoration time, unlike routine load shedding, which repeats daily.
  • If a maintenance shutdown runs longer than announced, that’s worth reporting through the complaint channels (118 or 0800-63726) rather than assuming it’s normal load shedding.

Note: Maintenance shutdowns can affect even low-loss feeders that otherwise see almost no scheduled load shedding, so don’t assume your area is exempt just because your daily schedule is usually clear.

Comparison Table: Ways to Check the MEPCO Load Shedding Schedule

Method

Accessibility

Speed

Convenience

Notes

MEPCO Official Website

Any device with internet

Instant

High

Best for general feeder-wise tables

CCMS Portal (Reference Number)

Any device with internet

Instant

High

Best for connection-specific accuracy

SDO Office / Local Enquiry

In-person or phone

Same day

Medium

Best if your feeder name is unclear

Helpline 118 / SMS 8118

Any phone

Immediate

Medium

Best for reporting unscheduled outages

So, the CCMS portal is the best method for most consumers, because entering your own reference number gives you outage information tied to your exact connection instead of a broad area-wide table that might not match your specific feeder.

Tips for Managing MEPCO Load Shedding

  • Know your feeder name, not just your area. Two neighbors on different feeders can have completely different schedules, so relying on “my street” instead of your feeder name often gives you the wrong timing.
  • Recheck the schedule every season. Load shedding hours shift noticeably between summer and winter, so a schedule you checked in January won’t hold in July.
  • Avoid running heavy appliances during peak hours. Keeping air conditioners, geysers, and irons off between 6 PM and 10 PM in summer both reduces your bill and lowers your chance of an unscheduled trip.
  • Report outages that exceed the published schedule. If your feeder is showing power cuts well beyond its listed hours, that’s a complaint-worthy issue, not routine load shedding, call 118 or use the CCMS complaint option.
  • Keep a backup power plan for high-loss feeders. If you’re on a peri-urban or rural feeder averaging 8+ hours of daily cuts in summer, a small UPS or inverter setup for essential appliances is worth the investment.
  • Watch for maintenance shutdown announcements separately. These aren’t part of your daily routine schedule, so check MEPCO’s website or Facebook page occasionally instead of assuming any long outage is a data error.
  • Don’t confuse voltage fluctuation with load shedding. A dimming or flickering supply during peak hours is often a grid station capacity issue, not scheduled load shedding, and it’s worth reporting separately.
  • Use SMS alerts if MEPCO offers them for your circle. Some sub-divisions send outage alerts to registered mobile numbers, ask your local office if this service is active for your feeder.
  • Cross-check with neighbors on the same feeder. If your schedule doesn’t match what MEPCO’s website shows, ask a neighbor served by the same transformer, sometimes the published table lags behind the actual current schedule.
  • Escalate persistent mismatches to the RCC. If your area consistently gets more load shedding than officially scheduled, escalate to the Regional Complaint Cell rather than repeating complaints at the local office each time.

Frequently Asked Questions

What is the MEPCO load shedding schedule? 

It’s the daily timetable MEPCO follows to switch off electricity supply to specific feeders for set hours, based on each feeder’s loss category and overall demand on the grid.

How do I check the MEPCO load shedding schedule for my area? 

Check the load shedding section on mepco.com.pk, use the CCMS portal at ccms.pitc.com.pk with your 14-digit reference number, or ask your local SDO office which feeder serves your property.

What are MEPCO peak hours? 

Peak hours are typically 6 PM to 10 PM in summer (sometimes extending to 11 PM), when electricity demand across the grid is highest and unscheduled outages are more likely.

What is the MEPCO load shedding schedule in Multan? 

Multan’s schedule varies by feeder, urban areas within the city typically see 4 to 6 hours of daily load shedding, while outskirts like Shujabad Road or Sher Shah can face 8 to 12 hours on high-loss feeders.

How many hours of load shedding does MEPCO do daily? 

It ranges from close to zero on low-loss feeders to 10 or more hours a day on high-loss rural feeders during peak summer months.

What is a MEPCO grid station? 

A grid station is the local substation that distributes electricity to a group of feeders in your area, and it’s the reference point MEPCO uses when scheduling load shedding by location.

Why does my neighbor have less load shedding than me?

You’re likely on different feeders, and MEPCO applies shorter outage hours to low-loss feeders with better bill recovery and less electricity theft compared to high-loss feeders.

What is the MEPCO shutdown schedule? 

It refers to planned maintenance outages, separate from routine load shedding, announced in advance for grid station or transmission line work with a specific date and expected restoration time.

How do I report load shedding beyond the scheduled hours? 

Call the helpline 118 or file a complaint through the CCMS portal, mentioning that the outage duration exceeds your feeder’s published schedule.

Does MEPCO load shedding change with seasons? 

Yes, hours are typically longer in summer (April to October) due to higher demand and shorter or minimal in winter when overall consumption drops.

Can I check MEPCO load shedding schedule using my bill? 

Yes, your bill’s 14-digit reference number can be used on the CCMS portal to check outage details specific to your connection.

What is the difference between load shedding and an unscheduled power cut? 

Load shedding follows a published, repeating schedule for a specific feeder, while an unscheduled cut is due to a fault, trip, or unplanned issue and isn’t part of the regular timetable.

How can I reduce my bill during MEPCO peak hours? 

Shifting heavy appliances like air conditioners, geysers, and irons outside the 6 PM to 10 PM peak window can lower your bill by a noticeable margin if you’re on a time-of-use tariff.

Where does MEPCO publish its load shedding schedule?

It’s published on MEPCO’s official website under Consumer Services, and updates are sometimes also shared through local press or the DISCO’s Facebook page.

Is load shedding the same across all MEPCO circles like Bahawalpur and Sahiwal? 

No, each circle and even each feeder within a circle can have different hours, so a Bahawalpur schedule won’t necessarily match Sahiwal or Multan.

So, the CCMS online portal is the best overall method for most MEPCO complaints, because it gives you an instant tracking number, works from home, and creates a paper trail you can reference if the issue drags on.

Final Thoughts

If you want an accurate MEPCO load shedding schedule, skip guessing based on your general area and check your load through the CCMS portal using your bill’s reference number, that’s the closest you’ll get to your actual feeder’s timing. Keep an eye on peak hours too, since shifting heavy appliance use outside 6 PM to 10 PM in summer helps both your bill and your odds of avoiding an unscheduled trip.

If your feeder consistently runs longer outages than what’s published, don’t just accept it as normal, report it through 118 or escalate to the Regional Complaint Cell. I really suggest saving your feeder name once you find it, since that’s the one detail that makes every future schedule check faster.

Leave a Reply

Your email address will not be published. Required fields are marked *